Sagem 700 - Manual (Page 49)

49
A
LARM
If you decide to set the clock manually, press the "OK" or the " " button to access the date
and time screen. You can use the four directional buttons and the OK button to set the time.
a. Use the " " and " " buttons to switch between the items to be altered. The
selected item will flash.
b. Use the " " and " " buttons to alter the value selected.
c. Press the "OK" button to confirm.
4.1.2. Setting the Clock Automatically
If you choose to set the clock automatically, access the "Auto-Sync (NTP)" menu, and select
your time zone. The device will then alter the date and time automatically.
The following screen shows an example of the Time Zone screen.
4.2. A
LARM SETTINGS
To enable an alarm setting, you need to set the time and alarm music. The following table
illustrates a typical alarm setting procedure. It sets Alarm 1 to generate an alarm (play music)
at 7:00 AM, and to use the Internet radio station "4U Classical Rock" as the source of alarm
music.