Sagem 700 - Manual (Page 10)

10
Y
OUR
W
I
-F
I
IP R
ADIO
1.7. W
I
-F
I
IP R
ADIO SET
-
UP
Connect the WiFi Antenna (1) and the FM Antenna (2) to the appropriate antenna connectors
on the rear panel. If you prefer to use Ethernet for wired network connection, plug your
Ethernet cable into the RJ45 port (3).
Once you have made these connections, carefully plug the DC power adapter (4) to the outlet
and connect the DC power jack carefully to power the device.
To operate the device, you can use either the remote controller supplied, or the keypad
buttons.
You need to set up the network and your PC server before being able to use the radio and
music playback functions on the device.
The following tables describe the keypad functions available when the IP Radio device is in
operation.
(1)
(2)
(3)
(4)