Sagem 700 - Manual (Page 22)

22
I
NSTALLATION
(B) Manually set to the Wired Client Mode:
Screen on the
right
Screen shot Next screen Comment
1 "OK" button Initial screen
2 " " button
(4 times) " " button
or "OK" button
3 " " button
(Once) " " button
or "OK" button
4 " " button
(Once) " " button
or "OK" button Manually select the
wired client mode.
5 " " button
(Once) " " button
or "OK" button Select the DHCP
for auto configured
IP address.
6 "OK" button Confirm the
settings above.
7 Apply new settings.