Sharp XL-DV60 User Manual
Page 47
47
XL-DV60
A
d
v
a
n
ced Fea
tures
"
Rating level setting
Notes:
!
To change the rating level, enter a 4-digit password. It is set to
6629 by default.
!
While playing a disc with parental lock, the display may appear
requesting a password in order to watch some restricted scenes.
In such a case, enter the password to temporarily change the
parental level.
"
To change the password
When you forget your password
Indicator
Setting
1 G
Only DVD software intended for children can be
played back.
2
3 PG
4 PG 13
5
6 PG-R
7 NC-17
Only DVD software intended for general use and
children can be played back.
8 Adult
DVD software of any grade (adult/general/children)
can be played back.
No Limit
Rating level control is canceled.
1
After pressing the button, press the SET UP button.
2
Press the cursor ( or ) button to select "System Setup"
and press the ENTER button.
3
Press the cursor ( or ) button to select "Password" and
press the ENTER button.
4
Enter a 4-digit old password with the direct number but-
tons on the remote control.
(Default setting: 6629)
5
Enter a 4-digit new password with the direct number but-
tons on the remote control.
6
Enter the new password again for confirmation.
7
Press the SET UP button.
1
After pressing the button, press the SET UP button.
2
Press the cursor ( or ) button to select "System Setup" and
press the ENTER button.
3
Press the cursor ( or ) button to select "Restore Info" and press
the ENTER button.
4
Enter 2486 with the direct buttons and then press the ENTER but-
ton.
When reset is done according to this method, all settings, includ-
ing the settings for password and rating level, will be reset to the
factory defaults.