Sharp XL-DV60 - Manual (Page 28)

28
XL-DV60
D
V
D O
p
eration
Useful operation
The subtitle language and the audio language you select during
playback are reset each time you set this unit to the stand-by mode
or change the disc. To keep your preferred languages, set them in
the initial setting screen (see page 42). " To change the audio language (audio output)
During playback, you can change the audio language (audio out-
put).
Notes:
! The audio language on some DVDs may not be changed.
! For audio language and audio system, refer to the manual of the
disc.
! When playing a DTS on this unit, sound is not heard from the
speakers. To listen to the sound, change the audio language.
(Example: Dolby Digital 5.1-channel, Dolby Digital 2-channel,
etc.) However, only the 2.1-channel sound can be reproduced.
Alternatively, connect to a DTS digital surround amplifier, etc.
(see page 51).
1 While a disc is playing, press
the SHIFT button, and then
press the ZOOM/AUDIO but-
ton.
Audio language information
2 Repeat step 1 to select the desired audio number.
When playing DVD, the language changes as follows:
When playing video CD, audio CD and MP3, the sound chang-
es as follows:
Audio 1/3: AC-3 5.1 English
1: Original
(Dolby Digital 5.1
ch Surround)
2: English
(Dolby Digital 2
ch Surround)
Audio 1/3: AC-3 5.1 English
Audio 2/3: AC-3 2 English
Mono Left
Mono Right
Stereo