Sharp XL-DV60 User Manual

Page 24

XL-DV60

D O

eration

Playing a disc (continued)

Caution:

Notes:

When the unit is turned on, no operation is possible for 10 sec-
onds as the unit is performing the initial setting.

Stop positions may be recorded on some discs. When you play
such a disc, playback stops there.

During an operation, " " may appear indicating that the opera-
tion is disabled by the disc.

To resume playback after stopping
(resume play)

You can resume playback from the point playback is stopped.

To cancel resume play:
Press the button again while "

Pre-Stop" is lit.

Notes:

The resume play feature is disabled on some discs.

Depending on the disc, playback may resume slightly before the
position where it was stopped.

Do not place two discs in one disc tray.

Do not play discs with special shapes (heart
or octagon shaped) as it may cause malfunc-
tions.

Do not push the disc compartment while it is moving.

If the power fails while the disc compartment is open, wait until the
power is restored.

If the disc compartment is stopped with force, the unit will not func-
tion. If this occurs, press the ON/STAND-BY button to enter the
power stand-by mode and then turn the power on again.

If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.

When attempting to play discs with scratches or of a different re-
gion number, or unplayable or restricted (*1) discs, an error mes-
sage will appear on the TV display and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audi-

ence age.

While the disc is playing, press
the

button.

The system stores the point you stopped.

To restart play, press the
(play) button.

Playback resumes from the point you left off.

Pre-Stop

Play

Stop