beautypg.com

Hookups and settings, Hooking up the recorder, Step 1: connecting the aerial cable – Sony SVR-S500 User Manual

Page 7

background image

D:\DVR project\Instruction

manual\DTP\2689634111\GB04BAS-CEK.fm

master page=right

SVR-S500

2-689-634-11(1)

7

H

ook

up
s and

Se
tti

n

gs

Hookups and Settings

Hooking Up the Recorder

Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the mains lead
until you reach “Step 4: Connecting the Mains Lead” on page 10.

b

Notes

• See “Specifications” (page 49) for a list of supplied accessories.
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a SCART or video input jack.
• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting the Aerial Cable

Connect the aerial cable by following the steps below.

1

Disconnect the aerial cable from your TV and connect it to AERIAL IN on the rear panel of the
recorder.

2

Connect AERIAL OUT of the recorder to the aerial input of your TV, using an optional aerial
cable.

Hard disk recorder

TV

to RF OUT

to RF IN

Aerial cable (not supplied)

: Signal flow