Sony SVR-S500 - Manual (Page 46)

D:\DVR project\Instruction
manual\DTP\2689634111\GB12ADJ-CEK.fm
master page=left
SVR-S500
2-689-634-11(1)
46
This information screen shows the signal strength
of the broadcasts you are watching.
1
Select “Signal Strength,” in the Technical
Information display and press ENTER.
The Signal Strength display appears showing
both Tuner 1 and Tuner 2 signal strengths
along with the name of your local transmitter
and the tuned UHF channel.
The coloured bars indicates the signal quality.
2
Press the M/m buttons to toggle the position
of the green cursor between the description of
Tuner 1 and Tuner 2 signal strength.
If the signal strength is low you may need to
realign your aerial and / or to adjust the UHF
frequency.
We strongly recommend that you ask your
professional installer to arrange for the aerial
installation and frequency setting.
3
After viewing the information displayed,
press the RETURN
button to come back to the
Technical Information menu.
Signal Strength
SETUP
Signal Strength
For best picture quality your Tuner 1: hannington - 29
aerial should be aligned to
provide the highest possible
signal strength.
TO REALIGN : Slowly rotate the
aerial through 360 degrees
identifying the position that gives
greatest strength.
Highest: 89%
The received signal is acceptable
12:15
Strength
Errors
61 %
Max
Tuner 2: hannington -29
Freq- Freq+ Refresh
Strength
Errors
69 %
Max