Sony STR-DN1000 - Manual (Page 94)

94 US
Note
Depending on the connected component, the
Control for HDMI function may not work. Refer to
the operating instructions of the component. Preparing for the
“BRAVIA” Sync
To use the “BRAVIA” Sync, turn the Control
for HDMI function on for both the receiver
and the connected component. The receiver is
compatible with the “Control for HDMI-Easy
Setting” function.
When your TV is compatible
with the “Control for HDMI-Easy
Setting” function
When you connect a Sony TV with the
“Control for HDMI-Easy Setting” function,
the Control for HDMI function of the receiver
can be turned on simultaneously by turning the
Control for HDMI function of the TV on.
1 Make sure that the receiver, TV, and
playback components are connected
using an HDMI cable (not supplied).
(The respective components must be
compatible with the Control for HDMI
function).
2 Turn on the receiver, TV and playback
components.
3
Turn the Control for HDMI function of
the TV on.
The Control for HDMI function of the
receiver and all the connected components
are simultaneously turned on. During
setup, “SCANNING” appears in the
display, and once setting is completed,
“COMPLETE” will appear. Wait until the
setup is complete.
For details on setup of the TV, refer to the
operating instructions of your TV.