Sony STR-DN1000 - Manual (Page 113)

113 US
Ot
her
Oper
at
ions
1
Press the input button of the
playback component.
You can also use INPUT SELECTOR
+/– on the receiver.
2
Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
3
Prepare the recording
component.
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT jack) for recording.
4
Start recording on the
recording component, then
start playback on the playback
component.
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• Only analog input signals are output from the
analog output jack (for recording).
• HDMI sound cannot be recorded.
Using a bi-amplifier
connection
If you are not using surround back speakers,
you can connect the front speakers to the
SPEAKERS SURROUND BACK/BI-AMP/
FRONT B terminals using a bi-amplifier
connection.
To connect speakers
Connect the jacks on the Lo (or Hi) side of the
front speakers to the SPEAKERS FRONT A
terminals, and connect the jacks on the Hi (or
Lo) side of the front speakers to the
SPEAKERS SURROUND BACK/FRONT B/
BI-AMP terminals.
Make sure that metal fittings of Hi/Lo attached
to the speakers have been removed from the
speakers. Not doing so may cause a
malfunction of the receiver.
Recording onto a recording
media
VIDEO OUT
MONITOR
L
R
DIGITAL (ASSIGNABLE) DC5V
0.7A MAX
HDMI ANTENNA
DMPORT
IN 4
ASSIGNABLE (INPUT ONLY)
IN 3
IN 2 IN 3 IN 1 OUT AM
Y
PB / CB
COMPONENT VIDEO
OUT IN
PR / CR
IN 2 IN 1 MONITOR OUT
SA-CD/CD/CD-R VIDEO 1
IN
TV
AUDIO IN
VIDEO IN
SAT
AUDIO OUT AUDIO OUT
VIDEO OUT
OPTICAL IN
AUDIO IN
VIDEO IN
SUBWOOFER
AUDIO IN
VIDEO IN
BD
L
R
SAT IN BD IN DVD IN
OPTICAL COAXIAL
ASSIGNABLE (INPUT ONLY)
TV SIRIUS
L R L R
SPEAKERS
CENTER
FRONT A
SURROUND BACK/ FRONT B/ BI-AMP
L R SURROUND
L R L R
CENTER
FRONT A
SURROUND BACK/
FRONT B/
BI-AMP
L R
SURROUND
(for AUDIO) EZW -T100
Hi
Lo
Hi
Lo
SPEAKERS
Front speaker
(R)
Front speaker
(L)
continued