beautypg.com

Sony STR-DN1000 User Manual

Page 74

background image

74

US

Note

When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to “Large”. However, the sound will
be output from the subwoofer if
– the digital input signal contains LFE signals.
– the front and surround speakers are set to “Small”.
– the sound field for movie is selected.
– “Portable Audio” is selected.

To adjust the distance from the
seating position to each
speaker

You can adjust the distance from the listening
position to each speaker (front left/right,
center, surround left/right, surround back left/
right, subwoofer).

1

Press

V/v/B/b repeatedly to select the

speaker on the screen for which you
want to adjust the distance from the
seating position, then press

.

2

Press

B/b repeatedly to select “Dist:”.

3

Press

V/v repeatedly to set the

distance of the selected speaker, then
press .
You can adjust the distance from 3 feet

3 inches to 32 feet 9 inches (1.00 meter to
10.00 meters) in 1 inch (0.01 meter) steps.

To adjust the size of each
speaker

You can adjust each speaker’s (front left/right,
center, surround left/right, surround back left/
right) size.

1

Press

V/v/B/b repeatedly to select the

speaker on the screen for which you
want to adjust the size, then press

.

2

Press

B/b repeatedly to select “Size:”.

3

Press

V/v repeatedly to set the size of

the selected speaker, then press

.

• Large

If you connect large speakers that will
effectively reproduce bass frequencies,
select “Large”. Normally, select “Large”.

• Small

If the sound is distorted, or you feel a lack
of surround effects when using multi
channel surround sound, select “Small” to
activate the bass redirection circuitry and
output the bass frequencies of each
channel from the subwoofer or other
“Large” speakers.

Tips

• The “Large” and “Small” settings for each speaker

determine whether the internal sound processor
will cut the bass signal from that channel.

When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the subwoofer or other “Large”
speakers.

However, since bass sound has a certain amount of
directionality, it is best not to cut it, if possible.
Therefore, even when using small speakers, you
can set them to “Large” if you want to output the
bass frequencies from that speaker. On the other
hand, if you are using a large speaker, but prefer
not to have bass frequencies output from that
speaker, set it to “Small”.

If the overall sound level is lower than you prefer,
set all speakers to “Large”. If there is not enough
bass, you can use the equalizer to boost the bass
levels.

• The surround back speakers will be set to the same

setting as that of the surround speakers.

• When the front speakers are set to “Small”, the

center, surround, and surround back speakers are
also automatically set to “Small”.

• If you do not use the subwoofer, the front speakers

are automatically set to “Large”.