Sony STR-DN1000 - Manual (Page 114)

114 US
To set up speakers
1
Press GUI MODE.
After “MENU ON” appears on the
display for a while, “GUI” appears and
the GUI menu appears on the TV screen.
Press MENU if the GUI menu does not
appear on the TV screen.
2
Press V/v repeatedly to select
“Settings” then press or b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
“Speaker”, then press or b.
4
Press V/v repeatedly to select
“SP Pattern”, then press or
b.
5
Press V/v repeatedly to select
the appropriate speaker pattern
so that there are no surround
back speakers, then press
or b.
6
Press V/v repeatedly to select
“SB Assign”, then press or
b.
7
Press V/v repeatedly to select
“BI-AMP”, then press or b.
The same signals output from the
SPEAKERS FRONT A terminals can be
output from the SPEAKERS
SURROUND BACK/FRONT B/
BI-AMP terminals.
To exit the menu
Press MENU.
Notes
• Set “SB Assign” to “BI-AMP” before you perform
Auto Calibration.
• If you set “SB Assign” to “BI-AMP”, the speaker
level and distance settings of the surround back
speakers become invalid, and those of the front
speakers are used.
• If you set “SP Pattern” to a setting with surround
back speakers, you cannot set “SB Assign” to
“BI-AMP”.
2CH/
A.DIRECT A.F.D. MOVIE MUSIC
RESOLUTION
. > < <
MENU
RETURN/
EXIT
TOOLS/
OPTIONS
HOME
DISPLAY GUI MODE
O
INPUT
MODE
SLEEP
NIGHT
MODE
– CATEGORY +
V/v/B/b,
GUI MODE
MENU