Sprint Nextel PC3200 - Manual (Page 23)

Part 2: Driver Installation
1. Insert the PCS Connection Card into your computer’s PC Card slot
(Sprint label facing up). Then raise the antenna so that it is fully
extended and pointed up at a 90 degree angle. Use in any other
configuration may exceed FCC RF Exposure limits.
Note: Refer to Section 2D for complete instructions on Inserting and
Removing the PCS Connection Card, beginning on page 30.
WARNING: Once the card is inserted,do not physically remove the
PCS Connection Card until you have completed the Removing the
PCS Connection Card process described on page 30. Removing the card
improperly may cause a fatal error to your PC.
2. Your operating system will determine which Driver Installation
instructions you will follow:
4
Option 1: Hardware Detection for Windows 2000 and Me (page
21
)
4
Option 2: Hardware Detection for Windows 98SE (page
22
)
4
Option 3: Hardware Detection for Windows XP (page
24
)
Section 2: Installing the PCS Connection Card
20 2B: Installing Your PCS Connection Manager Software and PCS Connection Card
Part 1: Driver Installation