Sprint Nextel PC3200 - Manual (Page 13)

Care and Maintenance
As with any electronic device, the PCS Connection Card must be handled
with care to ensure reliable operation. Follow these guidelines in using
and storing the card:
4
Do not apply adhesive labels to the card, as they may cause the card
to become jammed inside the card slot.
4
The card should fit easily into your PC slot. Forcing the card into a
slot may damage connector pins.
4
Protect the card from liquids, dust and excessive heat.
4
When not installed in your computer, store the card in a safe place.
4
When storing or transporting your notebook computer, remove the
PCS Connection Card.
4
Optimal signal strength is usually obtained when the antenna is
raised and pointed up at a 90 degree angle. Do not forcefully bend
the antenna past 180 degrees.
4
When removing your PCS Connection Card, always grip it by the
sides of the card rather than the top. Never insert or remove the card
while holding the antenna, this action will damage the card.
4
Do not use the PCS Connection Card, with a handheld computer; it is
only designed for notebook computers.
4
Only use with notebook computers running supported Windows
Operating Systems (Windows
® 98SE, 2000, Me, XP).
4
If driving or operating a vehicle, do not handle or operate the PCS
Connection card. Doing so may distract the you from properly operating
the vehicle. In some states and provinces, operating communication
devices while in control of a vehicle is a criminal offense.
Section 1: PCS Connection Card Basics
10 1B: Getting Started