Sprint Nextel PC3200 - Manual (Page 18)

Section 2B
Installing Your PCS Connection
Manager
SM
Software and Card
Notebook PCs (Windows 98SE, Me, 2000 and XP)
The setup process for installing and using your PCS Connection Card
varies depending on what operating system you are running.
In This Section
The Installation Process has three stages:
4
Part 1: Software Installation - Install the PCS Connection Manager SM
Software.
4
Part 2: Driver Installation - Install the PCS Connection Card drivers.
4
Part 3: Activating and Provisioning Your PCS Connection Card -
Activate your account and configure the PCS Connection Card to use
your account.
This section guides you through the steps necessary to install your
PCS Connection Card and make it operational on a notebook PC.
Before beginning the installation process, it is recommended that you
quit all open applications.
CAUTION: Do not insert your PCS Connection Card until you have
installed the PCS Connection Manager
SM Software onto your PC.
Note: Windows 2000 and Windows XP: You will need administrative
privileges to install the software and drivers.
Note: Windows 98SE: Ensure that Windows Dial-Up Networking and
TCP/IP protocol are installed.
Section 2: Installing the PCS Connection Card
2B: Installing Your PCS Connection Manager Software and PCS Connection Card 15
Part 1: Software Installation