SMC Networks Barricade SMC7404BRA EU - Manual (Page 50)

LAN
4-25
Remember to configure your client PCs for dynamic address allocation
(See “Configuring Client PCs” on page 3-1 for details.)
IP Address Pool
Start IP Address Specify the start IP address of the DHCP pool. Do
not include the gateway address of the Barricade in
the client address pool. If you change the pool
range, make sure the first three octets match the
gateway’s IP address, i.e., 192.168.2.xxx.
End IP Address Specify the end IP address of the DHCP pool.
Domain Name If your network uses a domain name, enter it here.
otherwise leave this field blank
Parameter Description