SMC Networks Barricade SMC7404BRA EU - Manual (Page 118)

A-3
Management Problems
Cannot connect
using the Web
browser
• Be sure to have configured the Barricade with a
valid IP address, subnet mask, and default
gateway.
• Check that you have a valid network connection
to the Barricade and that the port you are using
has not been disabled.
• Check the network cabling between the
management station and the Barricade.
Forgot or lost
the password
• Press the Reset button on the rear panel (holding
it down for at least five seconds) to restore the
factory defaults.
Troubleshooting Chart
Symptom Action