beautypg.com

Connect the adsl line, Phone line configuration, Installing a full-rate connection – SMC Networks Barricade SMC7404BRA EU User Manual

Page 21: 6 connect the adsl line

background image

I

NSTALLATION

2-6

Connect the ADSL Line

Run standard telephone cable from the wall jack providing ADSL service
to the WAN port on your Barricade. When inserting an ADSL RJ-11 plug,
be sure the tab on the plug clicks into position to ensure that it is properly
seated. If you are using splitterless ADSL service, be sure you add low-pass
filters between the ADSL wall jack and your telephones. (These filters pass
voice signals through but filter data signals out.)

Phone Line Configuration

Installing a Full-rate Connection
If you are using a full-rate (G.dmt) connection, your service provider will
attach the outside ADSL line to a data/voice splitter. In this case you can
connect your phones and computer directly to the splitter as shown below:

Figure 2-1. Installing With a Splitter

Voice

Data

Residential

Connection

Point (NID)

Plain Old

Telephone

System (POTS)

or

Ethernet

hub or switch

ADSL Router

Splitter