beautypg.com

Chapter 3 configuring client pcs, Tcp/ip configuration, Hapter – SMC Networks Barricade SMC7404BRA EU User Manual

Page 24: Onfiguring, Lient

background image

3-1

C

HAPTER

3

C

ONFIGURING

C

LIENT

PC

S

TCP/IP Configuration

To access the Internet through the Barricade, you must configure the
network settings of the computers on your LAN to use the same IP subnet
as the Barricade. The default network settings for the Barricade are:

IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0

Note: These settings can be changed to fit your network requirements,

but you must first configure at least one computer as described in
“Configuring Client TCP/IP” on page 5-1

to access the

Barricade’s Web configuration interface in order to make the
required changes. (See “Configuring the Barricade” on page 4-1
for instructions on configuring the Barricade.)

See also other documents in the category SMC Networks Hardware: