Savin 7700W - Manual (Page 43)

Partial Copying
33
3
B
Slide the paper straight into the copier until it stops, or press the
{{{{RF Select/
Cut
}}}} key to turn on the RF Select indicator.
C
Place the original.
D
Press the
{{{{Function Select}}}} key when the leading edge of the area to be cop-
ied reaches the edge of the original table cover.
The "P" will stay on, not blinking.
The copier starts copying.
E
Press the
{{{{Function Select}}}} key when the trailing edge of the area to be cop-
ied reached the edge of the original table cover.
The "P" will start blinking again.
F
After the paper has been delivered, hold down the
{{{{Function Select}}}} key for
three seconds to turn the function off.