Savin 7700W - Manual (Page 41)

Setting a Leading Edge Margin
31
3
Setting a Leading Edge Margin
You can set a margin at the leading edge of the copy.
Note
❒ You can set up to a ±
99mm,
±
4.0" margin in 1mm, 0.1" steps at the leading
edge.
❒ The copy image is shifted to the trailing edge, when you make a copy using
the bypass table, or in the Preset Cut mode or Variable Cut mode.
❒ In the Semi Synchro Cut mode, the paper length is increased by the leading
margin width.
A
Press the
{{{{Function Select}}}} key until the Leading Edge indicator is lit.
B
Press the
{{{{+}}}} key and {{{{ −−−− }}}} key to specify an edge margin.
To zero the value, press the
{Clear/Stop} key.
C
Insert the original from the leading edge.
You can get same results using the Rear Table.
Using the Copy Paper Table, or in the Preset Cut mode,
Variable cut mode In the Semi Synchro Cut mode
Leading Edge
Margin
Leading Edge Margin