Savin 7700W - Manual (Page 37)

27
3. Copy Settings
Copying Onto Other Media
To copy onto translucent or tracing paper or film, use the
{Copy Media} key to
match the paper type refer to the following table.
If you are not sure of what type of paper you have, check the label on the paper
package to confirm it.
A
Press the
{{{{Copy Media}}}} key to turn on the Translucent or Film indicator.
The Wait indicator goes on and either the Translucent or Film indicator
lights.
B
When the wait indicator goes off and the Ready and the Set Paper indicator
go on, the copier enters the ready condition.
Note
❒ Even if you have set the Copy Media function correctly, creasing might oc-
cur depending on the temperature or humidity. If this happens, adjust the
fusing temperature manually. See the next page.
Type of paper Media setting
Plain paper Both indicators off
Film Film indicator on
Translucent paper Translucent indicator on
Heavy paper Translucent indicator on
Thin paper No indicator or the film indicator if necessary.