Parking a call – Siemens OPTIPOINT HIPATH 2000 User Manual
Page 53
Making Calls – Convenience Functions
53
Step by Step
Parking a Call
You can park up to ten calls, either internal, external, or
both. Parked calls can be displayed on and picked up
from another telephone. This feature is useful if you
want to continue a call at another phone.
Precondition: You are conducting a call.
Press the key. The LED lights up.
>
:
Select and confirm.
or
qij
Enter the code.
d
...
m
Enter the number of the park slot (0 - 9) and make a note
of it. If the park slot number you entered is not dis-
played, it is already in use; enter another one.
Retrieving a Parked Call
Precondition: One or more calls have been parked. The
telephone is idle.
Press the key. The LED lights up.
>
:
Select and confirm
1
.
or
rij
Enter the code.
d
...
m
Enter the park slot number you noted earlier.
If the park slot number you enter is not in use, you can-
not retrieve the call.
Program/Service
*
56=Park a call?
Program/Service
Retrieve call?
[1] ”Different Displays (HiPath 4000 Environment)”
If a parked call is not picked up, after a specific
period of time the call is returned to the tele-
phone from where it was parked (recall).