Siemens OPTIPOINT HIPATH 2000 - Manual (Page 49)

Making Calls – Convenience Functions
49
Step by Step
Assigning a Station Number (Not for U.S.)
If this function has been configured (contact your ser-
vice personnel), you can selectively assign a specific
number (DID number) to your telephone before making
an external call. The assigned number then appears on
the called party’s display.
Press the key. The LED lights up.
> :
Select and confirm
1
.
or
qhe
Enter the code.
o
Enter the DID number you wish to use.
o
Dial the external number.
Associated Dialing/Dialing Aid
If this function has been configured (contact your ser-
vice personnel), you can use a dialing aid to dial num-
bers and set up calls for your telephone.
The operating procedure depends on whether the dial-
ing aid is connected to the S
0
bus or the a/b (T/R) port.
You can also use your system telephone as a dialing aid
for other telephones.
Dialing aid on the S
0
bus:
On the PC, select a destination and start dialing.
n
The speaker on your telephone is switched on. Lift the
handset when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC select a destination and start dialing.
"Lift the handset" appears on the PC screen.
n
Lift the handset.
Program/Service
* 41=Temporary MSN?
[1] ”Different Displays (HiPath 4000 Environment)” Æ Page 117