Samsung BN68-01691A-02 - Manual (Page 34)

English - 2
Resetting the Picture Settings to the Factory Defaults
1. To select the desired picture mode, follow the “Changing the Picture
Standard” instructions numbers 1 and 2. (see page 28)
2. Press the ▲ or ▼ button to select “Picture Reset”, then press the ENTER
button.
3. Press the ▲ or ▼ button to select “Reset Picture Mode” or “Cancel”, then
press the ENTER button.
Press the EXIT button to exit.
Reset Picture Mode: All picture values in the current picture mode
return to default settings.
Cancel: Does not perform a screen reset.
•
•
Each mode can be reset. ➣
Setting the xvYCC
Setting the xvYCC mode to “On” increases detail and color space when watching
movies from an external device (ie. DVD player) connected to the HDMI or
Component IN jacks.
24. Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER
button.
25. Press the ▲ or ▼ button to select “Off” or “On”.
Press the ENTER button.
“xvYCC” is available when the picture mode is set to “Movie”, and the
external input is set to “HDMI” or “Component” mode.
➣
Detailed Settings
Picture Options
Picture Reset
Picture
Picture Reset
Does not perform a screen reset.
Cancel Reset Picture Mode
Enter Return Move
xvYCC :
Enter Move Return
Off
On
Enter
Detailed Settings
▲
Dynamic Contrast : Off
Gamma : 0
Color Space : Auto
White Balance
Flesh Tone : 0
Edge Enhancement : Off
xvYCC : Off ►
Move Return
BN68-01691A-00Eng.indb 32 2008-07-18 �� 10:24:23