Samsung BN68-01691A-02 User Manual

Page 25

English - 2

Setting Up the Remote to Operate Your STB

1. Turn off your STB.
2. Press the MODE button and make sure that the STB LED is illuminated.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the STB

code listed on page 26 of this manual for your brand of STB.

Make sure you enter three digits of the code, even if the first digit is a “0”.

(If there is more than one code listed, try the first one.)

. Press the POWER button on the remote control.

Your STB should turn on if your remote is set up correctly.

If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of

the other codes listed for your brand of STB.

(If no other codes are listed, try each code, 000 through 074.)
Note on Using Remote Control Modes: STB

When your remote control is in STB mode, the volume buttons still control your

TV’s volume.

Setting Up the Remote to Operate Your Cable Box

1. Turn off your Cable Box.
2. Press the MODE button and make sure that the STB LED is illuminated.
. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the cable

box code listed on page 26 of this manual for your brand of cable box. Make sure

you enter three digits of the code, even if the first digit is a “0”. (If there is more

than one code listed, try the first one.)

. Press the POWER button on the remote control.

Your cable box should turn on if your remote is set up correctly.

If your cable box does not turn on after set up, repeat steps 2, 3 and 4, but try one

of the other codes listed for your brand of cable box. If no other codes are listed,

try each code, 000 through 046.
Note on Using Remote Control Modes: STB

When your remote control is in STB mode, the volume buttons still control your

TV’s volume.

➣

SET

RESET

VCR

DVD

STB

SET

RESET

VCR

DVD

STB

SET

RESET

VCR

DVD

STB

SET

RESET

VCR

DVD

STB

BN68-01691A-00Eng.indb 23

2008-07-18 �� 10:24:20