Other commands, 23 camera control command, Command restriction – Sony XCL-U1000 User Manual
Page 23
23
Camera Control Command
Other Commands
■ Version Display
[Command]
VERSION
[Process]
Displays a model name and a software
version.
VERSION
ver x.xx
■ Help Display
[Command]
HELP
[Parameter 1]
[Process]
The help for the specified command is
shown. If no command name is specified, a list of
available commands appears. (Available commands
differs depending on modes or the type of camera
(color or black & white.)
Command Restriction
There is a case in which a valid input of a parameter is
ignored if it is set in conjunction with some other
settings.
In such a case, the input becomes invalid and “ERROR
STATUS” appears on the screen.
Shutter Speed Condition
It differs depending on whether the trigger mode is set
to ON or OFF.
a : Setting available.
X : Setting inavailable.
When the trigger mode is set to other than OFF
Trigger mode setting
Shutter speed setting
OFF
Mid-speed
Low-speed
area
area*
External trigger edge detection
X
a
X
External trigger pulse width detection
a
X
X
Internal trigger output
X
a
X
* Low-speed area is the area in which a shutter speed
exceeds a VD cycle.
1/10000s 1/5000s 1/2000s 1/1000s 1/500s 1/250s 1/120s 1/100s
1/30s
1/15s
1/7.5s
1/2s
1s
2s
0.100ms0.200ms0.500ms1.000ms2.000ms 4.000ms8.333ms10.00ms33.33ms66.67ms133.6ms500.0ms 1.000s 2.000s
VDO interval
UXGA full
Partial
Binning
66.78
15/16
14/16
13/16
12/16
11/16
10/16
9/16
8/16
7/16
6/16
5/16
4/16
3/16
2/16
1/16
58.83
55.26
51.63
48.06
44.43
40.86
37.23
62.46
33.66
30.03
26.46
22.83
19.25
15.63
12.05
33.39
Mid-speed area (setting available)
Low-speed area (setting inavailable)