Ptz device menu setup, Preset setup – Samsung SHR-5040 User Manual

Page 46

42_ PTZ camera control

 ZooM

The PTZ camera can perform the enlargement/

reduction function by using the

teLe/wide button on

the front panel in the PTZ device control mode.

ptz deviCe menu setup

In order to enter the PTZ device menu setup mode, first

select the channel set with PTZ by pressing the

ch1

ch4 buttons on the front panel and press the PtZ

button. If you enter the single screen PTZ device control

mode, the PTZ icon of the screen is changed from the

white color to the yellow color. At this time, the PTZ

menu setup window appears if the Search( )button is

pressed.

 PtZ ModeL

Displays the currently set PTZ model.

The function menus shown by the PTZ model are

displayed. Each menu allows you to set various PTZ

functions.

Auto: This traverses a designated location sequentially

from the PRESET 1 to 20.

Pan: If you press “Pan” after setting the positions of

two points ‘Start’ and ‘End’ from the internal menu of

the PTZ camera, this function makes it to come and go

repeatedly between two points. The Pan function can

be cancelled by pressing “

Pan” again.

setup: Select it either to designate an arbitrary location

to the PRESET number or to enter the internal menu

screen of the PTZ camera.

Pattern: This function remembers manual operations

such as PAN, TILT, ZOOM, and FOCUS and plays

back as it remembers.

delete: This function allows you to delete information

on the location of PTZ, which is set to PRESET No.

1 to PRESET No. 20 once you press

“delete” while

pressing

“setup”.

 P/t sPeed

You can set the Pan/Tilt speed of the PTZ camera in

step-by-step fashion. After moving the cursor to the

P/t sPeed, press the enter(

) button and set the

speed using the 

or  button. Escape from the

change mode by pressing the

enter(

) button again.

 ZooM sPeed

You can set the zoom speed of the PTZ camera in

step-by-step fashion. After moving the cursor to the

ZooM sPeed, press the enter(

) button and set

the speed using the 

or  button. Escape from the

change mode by pressing the

enter(

) button again.

 Mode seLect

It is used when designating a certain position of the

PTZ camera to the PRESET ID or controlling the

position of the PTZ camera. By toggling the button, it

is switched to “

cursor Mode”  “P/t Mode”, “P/t

Mode”  “cursor Mode”.

cursor Mode: This shows the state that can move

between menus.

P/t Mode: This shows the state that can control the

Pan, Tilt and Zoom function of the PTZ camera.

preset setup

This is the function that saves a desired position of the

PTZ camera.

It allows storing up to 20 PTZ camera positions.

If the Search( )button is pressed from the single screen

PTZ device control mode, the PTZ menu setup window

appears.

ptz model

p/t speed

zoom speed

preset

mode seleCt

samsung

auto

pan

setup

delete

Cursor mode

pattern

run

list