Network, Caution, Ip setup – Samsung SHR-5040 User Manual

Page 39

menu setup _

 Backup device

Sets the storage device for backup. The backup

device supports the USB storage device and CD.

Press the

enter(

) button and select the backup

device by using the 

or  button. Escape from the

change mode by pressing the

enter(

) button again.

 camera

Sets the camera channel for backup.

 The backup file can be played on PC, but can

not be played from a DVR.

 In case of the AVI backup, you may need a DivX

codec to play the saved file. You can obtain the

DivX codec from the website www.divx.com.

 It is recommended to use K-lite codec standard.
 A warning message appears if no backup

device exists.

 For a watermark, insert a mark that only the

manufacturer knows into the video data lest

a person should identify the mark with naked

eyes. If the saved video data are forged or

altered, "Tampered" will be displayed on the

screen of the SDB Viewer or SFX Player.

If not, "Approved" will be displayed.

Caution

 Please do not remove the storage device

during backup or do not turn off the

system power. The system may run

abnormally.

 The system speed may be slowed down

during backup.

 When backing up the data to CD,

the recorded data may be damaged

according to the conditions of disk

recording surface.

network

The details of the network menu are as follows:

IP Setup

 connection Mode

Sets the network type for the main system.

Press the

enter(

) button and select the network by

using the 

or  button.

not Use: Select it when you do not use a network.

stAtic-iP: Select it when the main system is

connected to the network that is using the fixed IP.

dhcP: Select it when the main system is connected

to the network whose IP address is dynamically

assigned by DHCP.

AdsL(PPPoe): Select it when the main system is

connected to the ADSL network using PPPoE.

 id/Password

You can manually enter the ID/PASSWORD when

ADSL is selected.

When the main system is connected to the ADSL

network, you need to enter the user ID and password

provided by the ADSL carrier. The user ID and

password may be entered by using the virtual

keyboard.

Connection mode

id/password

site ip

subnet mask

gateway

port (tCp)

Bandwidth

not use

user

000.000.000.000

255.255.255.000

000.000.000.000

554

10mbps

ip setup

Cancel

shr-5042/5040 menu

system

►

Camera

►

monitoring

►

record mode
event record

►

record schedule
Backup
network

►

move/Control

select

exit

ip setup
web viewer port setting
network status
ddns setup
ntp setup
Call Back setup
transfer picture setup

SHR-5042_Eng_02.indd 35

2008-01-25 오전 9:31:28