Sunwave Tech. 3815 - Manual (Page 54)

SRC-38 SERIES User’s Manual
48
IR Blaster Cable – SRC-IR -( for SRC-3815 )
The IR Blaster Cable is an optional 6 ft. cable with an IR
emitter on one end that enables the IR-extender to send
signals to a device that would not be within its normal
directional range. A device can be operated by aiming the
cable at the device or placing it directly onto the device.
Additional RF IR-extender – SEL-6000 ( for SRC-3815)
The RF IR-extender receives the RF
signal sent by the SRC-3815 and
then sends the appropriate IR
signal to the desired device. The
SEL-6000 should be aimed at the
equipment you want to operate.
It has 10 RF address settings that
correspond to settings selected in
the SRC-3815.
Additional IR-extenders can be
placed throughout the house.