For src-3815 remote control – Sunwave Tech. 3815 User Manual
Page 10
SRC-38 SERIES User’s Manual
4
For SRC-3815 Remote Control
IR Out jack – Connect the IR
blaster cable to this jack to
operate a specific device.
IR-extender address setting –
Set the RF address of the IR-
extender by selecting and
address number between 0 ~ 9.
AC adapter – Plug AC adapter
into jack and then into AC
outlet.
Remote Locator Button –
Press locator button to call
remote control to make beep
signal and locate the remote.
(Only for SRC-3815)
Infrared Emitter – Sends IR
signal, aim at equipment.
IR Blaster Cable – attach
directly to equipment that is not
within directional range of IR-
extender. With front and rear
adhesive.
AC Adapter – plug into IR-
extender and into AC outlet.
IR Blaster cable with
front and rear adhesive
AC adapter