Sunwave Tech. 3815 - Manual (Page 23)

Code Menu
17
Code Menu
Enter the setup menus, scroll to Code and press to
enter the code menu. In the code menu, press and
to scroll through the code menu options:
•
Pre-Code
: use this method to automatically configure
all buttons on the SRC-3810/3815 for use with a specific
manufacture model number. This feature is the fastest
way to program the SRC-3810/3815 but requires that
your device be located in the Pre-programmed Code
List that was bundled with the SRC-3810/3815. Some
newer or less-common devices may not be pre-
programmed and must be learned using the Learning
Function.
•
Learn
: use this method to directly learn the proper
infrared signals from another remote control. This
method is perfect for newer or less common devices
or if a certain button still not does perform the desired
function after using pre-programmed manufacturer
codes; however, not 100% of codes can be learned
and it may be necessary to collect unrecognized
codes and send them to SUNWAVE. (See page 24 for
more information on unrecognized code collection.)
•
Del Key
: erases the key code
•
Del Bank
: erases the device code
•
Debug
: collects unrecognizable (un-learnable) infrared
codes for debugging purposes