Twin picture functions – Sharp Aquos LC 26GD4U User Manual

Page 87

Other viewing options

Twin picture functions

Allows you to display two pictures on the screen at
one time.

Twin picture in all cases

You can display two same-sized pictures except when
inputting from INPUT 4 (HDMI) and INPUT 5 (DVI-I)
terminals and CARD.

Press TWIN PICTURE.

• Twin picture displays and a selected input

source image displays.

Press SELECT to set either screen to be
active.

• “

z” displays on the active screen, which has

sound output.

Press TWIN PICTURE to exit twin picture.

NOTE

• This function does not work under the following input

conditions:
1INPUT 4 (HDMI)
2INPUT 5 (DVI-I)
3CARD
4Two pictures from the same source (e.g. INPUT 1 and

INPUT 1)

5An image will appear on the right side only if it is a 480i

signal.

*An SDTV image has a 480p signal, so it will not appear

either.

• When this function is not available, “No dual screen display

available” will display.

• Pressing ANALOG-A, B, DIGITAL while viewing in Twin

Picture mode (TV image and video image) with TV selected
will display the TV image of the other tuner.Picture and
still image

Picture and still image

You can display two same-sized pictures – one moving
and one still.

Press FREEZE.

• A moving image displays on the left screen and

a still image displays on the right screen. The
still image is one frame captured from a moving
image at the moment you press FREEZE.

Update the still image by pressing ENTER.

• Each time you press ENTER, the image on the

right screen updates.

• If a PC card with enough capacity is inserted

in the system, a message will appear on the
screen asking you whether to save the image.
Press REC on the remote control if you want to
save. (See page 44.)

Press FREEZE to exit still image.

NOTE

• This function does not work in INPUT 4 (HDMI), INPUT 5

(DVI-I) and CARD.

• When this function is not available, “No displaying still

image” will display.

• Another image can be saved if a PC card with enough

capacity is inserted in the system.

• The still image is automatically erased after 30 minutes.
• If you are using FREEZE and a broadcast activates the V-

CHIP BLOCK, FREEZE will cancel and a block message
will appear.

FREEZE