Sharp Aquos LC 26GD4U User Manual

Page 55

Using external equipment

Connecting HDMI equipment

You can use the INPUT 4 terminal when connecting an HDMI equipment.

HDMI equipment

HDMI cable
(Commercially available)

Displaying an image from HDMI equipment

To watch an HDMI equipment image, select
“INPUT4” from “INPUT SOURCE” menu
using INPUT on the remote control unit or
on the Display. (See page 66.)

INPUT SOURCE

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

CARD

i.LINK

Press MENU and the MENU screen displays.

Press a/b to select “HDMI Setup”, and then
press ENTER.

Press c/d to select “Option”.

[Option ... HDMI Setup]

Option

Digital Noise Reduction

Output Select

Center Channel Input

Caption Setup

Audio Only

Quick Shoot

[Fixed]

[Off]

HDMI Setup

[Low]

[Off]

Press a/b to select the desired item and
press ENTER.

Press a/b/c/d to select the desired setting
and press ENTER.

NOTE

• Refer to your external equipment operation manual for

the signal type.

Selectable items

Auto/RGB/YCbCr
4:4:4/YCbCr 4:2:2

Auto/ITU601/
ITU709

Standard/
Out of standard

Enable/Disable

HDMI Setup
items

Signal
Type

Color
Matrix

Dynamic
Range

Auto View

Description

Select the signal type from
an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.

Select the internal color
space conversion method
when an RGB signal is
input. Normally, select
Auto.

Select the signal amplitude
range. Normally, select
Standard.

Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.