Sony Data Projector VPL-MX20 - Manual (Page 58)

58
Specifications
VPL-MX20: Max 290 W
in standby (Standard): 6 W
in standby (Low): 2 W
Heat dissipation
990 BTU
Operating temperature
0°C to 35°C (32°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Supplied accessories
Remote Commander (1)
Lithium battery CR2025 (1)
HD D-sub 15 pin cable (2 m) (1)
(1-791-992-51/Sony)
Carrying case (1)
AC power cord (1)
Operating Instructions (CD-ROM)
(1)
Quick Reference Manual (1)
Safety Regulations (1)
Security Label (1)
Design and specifications of the unit, including
the optional accessories, are subject to change
without notice.
Always verify that the unit is operating properly
before use. SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING, BUT
NOT LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF THE
LOSS OF PRESENT OR PROSPECTIVE
PROFITS DUE TO FAILURE OF THIS UNIT,
EITHER DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
Optional accessories
Projector Lamp
LMP-M200 (for replacement)
Not all optional accessories are available in
all countries and area.
Please check with your local Sony
Authorized Dealer.
Pin assignment
INPUT A connector (HD D-sub 15-pin,
female)
Note
1 R/R-Y 9 Power
supply input
for DDC
2 G/Y 10 GND
3 B/B-Y 11 GND
4 GND 12 DDC/SDA
5 RESERVE 13 HD/C.Sync
6 GND (R) 14 VD
7 GND (G) 15 DDC/SCL
8 GND (B)