beautypg.com

Specifications, Optical characteristics, Electrical characteristics – Sony Data Projector VPL-MX20 User Manual

Page 57: Input/output, General

background image

57

Specifications

Oth

e

rs

Specifications

Optical characteristics

Projection system

3 LCD panels, 1 lens, projection

system

LCD panel

0.63-inch XGA panel,

approximately 2,360,000 pixels
(786,432 pixels

× 3)

Lens

1.2 times zoom lens (powered)
f 18.19 to 21.87 mm/F1.65 to 1.8

Lamp

200 W Ultra High Pressure

mercury lamp

Projected picture size (measured diagonally)

30 to 150 inches
30 to 150 inches (auto focus

operation range)

Light output

2500 lumen
(When the Lamp Mode is set to

“High.”)

Throwing distance (When placed on the floor.)

30-inch: 0.86 to 0.99 m

(2.8 to 3.2 feet)

40-inch: 1.2 to 1.3 m

(3.9 to 4.3 feet)

60-inch: 1.8 to 2.0 m

(5.9 to 6.6 feet)

80-inch: 2.4 to 2.7 m

(7.9 to 8.9 feet)

100-inch: 3.0 to 3.4 m

(9.8 to 11.2 feet)

120-inch: 3.6 to 4.1 m

(11.8 to 13.5 feet)

150-inch: 4.5 to 5.1 m

(14.8 to 16.7 feet)

There may be a slight difference between the
actual value and the design value shown above.

Electrical characteristics

Color system NTSC

3.58

/PAL/SECAM/

NTSC

4.43

/PAL-M/PAL-N/

PAL60 system, switched
automatically/manually

(NTSC

4.43

is the color system used

when playing back a video
recorded in NTSC on a
NTSC

4.43

system VCR.)

Resolution

750 horizontal TV lines (Video

input)
1,024

× 768 dots (RGB input)

Acceptable computer signals

1)

fH: 19 to 80 kHz
fV: 48 to 92 Hz

(Maximum input signal resolution:

SXGA+ 1400

× 1050

fV: 60 Hz)

1)

Set the resolution and the frequency of the
signal of the connected computer within the
range of acceptable preset signals of the
projector.

Applicable video signals

15 k RGB/Component 50/60 Hz,

Progressive component 50/60
Hz, DTV (480/60I, 575/50I,
480/60P, 575/50P, 720/60P, 720/
50P, 1080/60I, 1080/50I),
Composite video

Input/Output

INPUT A

HD D-sub15-pin, female
Analog RGB/component:

R/R-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative
(75 ohms terminated)
B/B-Y: 0.7 Vp-p ±2 dB
(75 ohms terminated)

SYNC/HD: Composite sync input:

TTL level, positive/negative

Horizontal sync input: TTL level,

Positive/negative

VD: Vertical sync input: TTL

level, positive/negative

VIDEO

Composite video: 1 Vp-p ±2 dB

sync negative (75 ohms
terminated)

Network (VPL-MX25 only)

Wireless LAN:

IEEE.802.11.a/b/g

2)

2)

Some wireless networks cannot be used in
certain countries or areas.

USB (VPL-MX25 only)

USB TYPE A

General

Dimensions

273

Ч 45 Ч 206 mm (10

3

/

4

Ч

1

13

/

16

Ч 8

1

/

8

inches) (w/h/d)

(without projecting parts)

Mass

Approx. 1.7 kg (3 lb 12 oz)

Power requirements

AC 100 to 240 V, 2.9 to 1.2 A, 50/

60 Hz

Power consumption

VPL-MX25: Max 290 W

in standby (Standard): 11 W
in standby (Low): 2 W

This manual is related to the following products: