Samsung HT-X725G - Manual (Page 59)

ENG
●
rADIO
Radio
LISTENING TO rADIO
remote Control
Press the TUNEr button to select the FM band.
Tune in to the desired station.
Automatic Tuning 1 : When the [, ] button is
pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the ,, .
button to automatically search for active
broadcasting stations.
Manual Tuning : Briefl y press the ,, . button to
increase or decrease the frequency incrementally.
Main Unit
Press the FUNCTION button to select the FM band.
Select a broadcast station.
Automatic Tuning 1 : Press the STOP (@) button to
select PrESET and then press the [, ] button to
select the preset station.
Automatic Tuning 2 : Press the STOP (@) button to
select MANUAL and then press and hold the [, ]
button to automatically search the band.
Manual Tuning : Press the STOP (@) button to select
MANUAL and then briefl y press the [, ] button to
tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between STEREO and MONO.
In a poor reception area, select MONO for a clear, interference-free broadcast.
PrESETTING STATIONS
Example : Presetting FM 89.10 in the memory
Press the TUNEr button to select the FM band.
Press the ,, . button to select 89.10.
Press the TUNEr MEMOrY button.
01 fl ashes in the display.
Press the [, ] button to select preset number.
You can select between 1 and 15 presets.
Press the TUNEr MEMOrY button again.
Press the TUNEr MEMOrY button before Number
disappears from the display.
Number disappears from the display and the station
is stored in memory.
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the [, ] button on the remote control to select a channel.
This unit does not receive AM(MW) broadcasts.
1.
.
~
~
~
1.
.
~
~
~
~
~
1.
.
.
~
4.
~
.
~
~
.
~
M
`
HT-X725_GB_ENG_0218.indd 59 2009-02-18 �� 10:33:35