Samsung HT-X725G - Manual (Page 56)

System setup
DOLBY PrO LOGIC II MODE
You can select the desired Dolby Pro Logic II AUDIO mode.
Press the
PL II MODE button.
Each time the button is pressed, the mode changes as follows.
MUSIC ➞ CINEMA ➞ PrO LOGI ➞ MATrIX ➞
STErEO ➞ MUSIC
PrO LOGIC II
MUSIC : When listening to music, you can experience sound
effects as if you are listening to the actual
performance.
CINEMA : Adds realism to the movie soundtrack.
PrO LOGI : You will experience a realistic multi-channel effect, as if you're using fi ve speakers,
though using just the front left and right speakers.
MATrIX : You will hear 5.1 channel surround sound.
STErEO : Select this to listen to sound from the front left and right speakers and the subwoofer only.
When selecting Pro Logic II mode, connect your external device to the AUDIO INPUT jacks
(L and R) on the player. If you connect to only one of the inputs (L or R), you cannot listen to surround sound.
DOLBY PrO LOGIC II EFFECT
This function works only in Dolby Pro Logic II MUSIC mode.
Press the PL II MODE button to select MUSIC mode.
Press the PL II EFFECT button.
Press the _, + buttons to select the desired effect setting.
PANOrAMA : This mode extends the front stereo image
to include the surround speakers for an exciting
"wraparound" effect with side wall imaging.
You can select either 0 or 1.
C- WIDTH : Sound is output to the centre speaker only.
The front left and right speakers produce phantom sound.
You can select between 0 and 7.
DIMENS 1 : Incrementally adjusts the sound fi eld (DSP) from the front or rear.
You can select between 0 and 6.
~
~
~
~
~
~
M
`
1.
.
.
~
~
~
HT-X725_GB_ENG_0218.indd 56 2009-02-18 �� 10:33:32