Samsung HT-X725G - Manual (Page 21)

1
ENG
●
CONNECTIONS
CONNECTING THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD3
(supplied) METHOD2 METHOD1
METHOD 1 : HDMI
Connect a HDMI cable (not supplied) from the HDMI OUT jack on the back of the Home Cinema
System to the HDMI IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the Component Video Output (P
R
, P
B
and Y) jacks on the back of the Home Cinema
System to the Component Video Input jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the Home Cinema System
to the VIDEO IN jack on your TV.
The resolution from the Component Output is 576i(480i).
If you use an HDMI cable to connect a Samsung TV to the Home Cinema System, you can operate the Home
Cinema using the TV's remote control. This is only available with SAMSUNG TV's that support Anynet+(HDMI-
CEC).
Please check the ' logo (If your TV has an ' logo, then it supports the Anynet+ function.)
M
`
`
`
HT-X725_GB_ENG_0218.indd 21 2009-02-18 �� 10:33:03