Samsung HT-X725G - Manual (Page 54)

4
System setup
SETTING THE AV SYNC
Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to
match the video.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
Press the Cursor % button to move to AV-SYNC and then press the
ENTEr or + button.
Press the Cursor $, % button to select the AV-SYNC Delay Time
and then press the ENTEr button.
You can set the audio delay time between 0 ms and 300 ms. Set
it to the optimal status.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
SETTING THE HDMI AUDIO
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
In Stop mode, press the MENU button.
Press the Cursor % button to move to Audio and then press the
ENTEr or + button.
Press the Cursor % button to move to HDMI AUDIO and then press
the ENTEr or + button.
Press the Cursor $, % button to select ON or OFF and then press
the ENTEr button.
ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your TV speakers only.
OFF : Video is transmitted over the HDMI connection cable only, and audio is output
through the home cinema speakers only.
d Press the rETUrN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
The default setting of this function is HDMI AUDIO OFF.
HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
1.
.
.
4.
~
1.
.
.
4.
~
~
M
`
`
MOVE ENTER EXIT RETURN
MOVE SELECT EXIT RETURN
MOVE ENTER EXIT RETURN
MOVE SELECT EXIT RETURN
HT-X725_GB_ENG_0218.indd 54 2009-02-18 �� 10:33:31