Sprint Nextel LX160 User Manual
Page 32
20
Section 2A: Your Phone – The Basics
Installing the Battery
To install the Li-Ion battery:
ᮣ
To install, insert the battery into the opening on the back
of the phone (1) and gently press down until the latch
snaps into place (2).
Removing the Battery
WARNING:
Do not handle a damaged or leaking Li-Ion battery as you
can be burned.
To remove your battery:
1.
Make sure the power is off so that you don’t lose any
stored numbers or messages.
2.
Push and slide the cover upward until it comes free from
the phone.
3.
Hold the phone in one hand so that the battery is facing
you.
4.
Using two fingernails, hook the top edge of the battery
(as shown in the photograph), and push down while
pulling out on the battery to remove it from the phone.