Schneider Electric 174 CEV - Manual (Page 33)

Configuring the Bridge
29
3.3
Configuration With a BOOTP Server
If a BOOTP server is available, you can use it to configure the bridge remotely.
You will need the MAC address of the bridge. The MAC address is marked on a
label on the bridge’s rear panel. Note the address and give it to your server
system administrator.
Use the BOOTP server to associate the bridge’s MAC address with a unique IP
address and assign it to the bridge.
If you want the bridge to use a centralized mapping file for mapping TCP/IP and
Modbus Plus addresses, provide the Uniform Resource Locator (URL) to the file
RTE.TXT in the root path option (option 17) of the BOOTP server.
The URL format is:
// / rte.txt
Examples:
//user.modicon.com / rte.txt
//205.167.7.0 / rte.txt