SIIG 04-0373C User Manual
Page 6
6
6.
Press Ctrl+E to exit the BIOS.
7.
When asked Are you sure to exit (Y/N)?, press Y to
exit and reboot.
For Manual Configuration
1.
As the BIOS boots press either Ctrl+S or F4 when
prompted to enter the RAID BIOS.
2.
At the next screen select Create RAID Set, then
press Enter.
3.
Select Striped, then press Enter.
4.
Select Manual configuration, then press Enter.
5.
Select the first drive, press Enter.
6.
Select the second drive, press Enter.
7.
Select the chunk size, then press Enter.
8.
When asked Are You Sure (Y/N)?, press Y to accept.
9.
Press Ctrl+E to exit the BIOS.
10. When asked Are you sure to exit (Y/N)?, press Y to
exit and reboot.
RAID 1 (Mirror)
For New/Blank Hard Drives
1.
As the BIOS boots press Ctrl+S or F4 when prompted
to enter the RAID BIOS.
2.
At the next screen select Create RAID Set, then
press Enter.
3.
At the next screen select Mirrored then press Enter.
4.
Select Auto configuration, then press Enter.
5.
When asked Are You Sure (Y/N)?, press Y to accept.
6.
Press Ctrl+E to exit the BIOS.
7.
When asked Are you sure to exit (Y/N)?, press Y to
exit and reboot.