SIIG 04-0373C - Manual (Page 15)

15
4. Click Finish, remove the driver CD, shutdown
Windows, and setup your RAID array.
When Windows resumes, go to SATARaid GUI on page
17 and install the RAID monitoring utility.
To Verify 2000/XP/Server 2003 Installation
1. Right click My Computer, click Manage, click
Device Manager.
2. Double click SCSI and RAID controllers, Silicon
Image SiI 3512 SATARaid Controller should be
displayed.
32-bit & 64-bit Windows Vista
™
For A New Installation
1.
Setup the RAID array prior to Windows installation.
2. Follow Windows installation procedure.
3. At Where do you want to install Windows?, click
Load Drivers.
4. Insert the driver CD, click Browse.
5. Double click your CD-ROM drive,
For 32-bit Windows Vista: click OK.
For 64-bit Windows Vista: select 64bit, then click OK.
6. Select Silicon Image SiI..., then click Next.
7. Follow the on-screen instructions to complete
Windows Vista operating system installation.
When Windows installation completes, go to SATARaid
GUI on page 17 and install the RAID monitoring utility.