SIIG 04-0373C - Manual (Page 10)

10
For An Existing Installation
1.
Install the board and boot up to Windows.
2. At the Add New Hardware Wizard, click Next to
continue.
3. Select Search for the best driver for your device
option then click Next.
4. Insert the driver CD, check CD-ROM drive, uncheck
the other check boxes, then click Next.
5. Click Next, then Finish.
6. Remove the driver CD, shutdown Windows, and
setup your RAID array.
When Windows resumes, go to SATARaid GUI on page
17 and install the RAID monitoring utility.
Windows ME
For A New Installation
1.
Setup the RAID array prior to Windows installation.
2. Follow Microsoft's Windows ME installation
procedure.
3. Once Windows has installed, right click My
Computer, click Properties, click Device Manager.
4. Double click PCI RAID Controller listed under
Other Devices.
5. Select Driver tab and click Update Driver button.
6. Insert the driver CD, select Automatic search for a
better driver (Recommended), then click Next.
7. Accept the default entry, then click OK.
8. Click Finish, remove the driver CD, then restart
Windows to complete the installation.
When Windows resumes, go to SATARaid GUI on page
17 and install the RAID monitoring utility.