Sharp UX-B20 - Manual (Page 69)

Distinctive Ring (Requires Subscription to Service)
67
5. Special Functions
4
Press a number from 1 to 3 (1 to 5 in Canada) to select the ring pattern
below that matches your second number’s ring pattern. Press 6 to have
your fax automatically answer your normal telephone number. Press 7 to
turn off the distinctive ring function.
5
Press to return to the date and time display.
6
Set the reception mode to FAX.
♦
When using distinctive ring, you must set the reception mode of your fax
machine to FAX. When your designated fax number is dialed, your fax will
automatically answer and begin reception after two rings. Note that other
devices on the same line will also ring until your fax answers. If one of your
other numbers is dialed, the fax will ring; however, it will not answer.
RING PATTERN 1 Two short rings
RING PATTERN 2 One short, one long, and one short ring
RING PATTERN 3 Two short rings and one long ring
RING PATTERN 4
(Canada only) Three very short rings
RING PATTERN 5
(Canada only) Two very short rings
STANDARD RING Your standard (normal) ring pattern
OFF SETTING Turn distinctive ring off
The display briefly shows
your selection, then:
FAX SIGNAL RX
RESOLUTION/
RECEPTION
FAX TEL