Sharp UX-B20 - Manual (Page 49)

Batch Page Numbering
47
2. Send
ing
Fa
x
e
s
Batch Page Numbering
You can change the page numbering of the transmitted document from simple
numbering ("P.01", "P.02", etc.) to batch numbering, which means that a slash
and the total number of pages being sent are added after each page number
(for example, "P. 01/05", "P.02/05", etc.). This allows the recipient to check for
missing pages.
1
Load the document(s).
2
Press once and once.
3
Press once.
4
Enter the total number of pages (“01” to “99”) by pressing the numeric
keys.
Example: 5 pages
5
If desired, press to set the resolution and/or contrast.
6
Dial the receiving machine and send the fax.
♦
If you need to cancel a batch number entry, remove the document from the
feeder or press .
♦
If the number of pages actually transmitted does not coincide with the batch
number entered, the alarm will sound and PAGE COUNT ERROR will
appear in the display. PAGE E. will also appear in the NOTE column of the
Transaction Report if printed.
RESOLUTION/
RECEPTION
Display:
PAGE COUNTER
ENTER # (01 - 99)