Sharp UX-B20 - Manual (Page 44)

Sending a Fax by Automatic Dialing
42
Editing and clearing auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Press once and once.
2
Press or until the number that you wish to edit or clear
appears in the display.
3
Press .
4
Press for EDIT or for CLEAR.
•
If you selected CLEAR, go to Step 8.
5
If you selected EDIT, make the desired changes to the number.
•
Press or to move the cursor to the digit or digits you wish to
change, and then enter the new digit. The new digit will replace the old
digit.
•
If you do not wish to change the number, go directly to Step 6.
Display:
1=EDIT, 2=CLEAR
6
Press .
7
Return to Step 2 to store another number, or press to return to the
date and time display.
START/
MEMORY
Display: