Sharp UX-B20 - Manual (Page 54)

Using TEL Mode
52
RESOLUTION/
RECEPTION
2
Press once and once.
3
Press once.
4
Enter the desired number of rings (any
number from 2 to 5).
Example: 3 rings
5
Press to return to the date and time display.
Note: If you are using Distinctive Ring, the machine will answer calls after two
rings regardless of the above setting.
Using TEL Mode
The display briefly shows
your selection, then:
To select TEL mode, press
(with no document in
the feeder) until the arrow in the
display points to TEL.
RESOLUTION/
RECEPTION
When the reception mode is set to TEL, you must answer all calls (even faxes)
by picking up the machine’s handset or an extension phone connected to the
same line.
NUMBER OF RING
TRANSACTION
ENTER (2-5) (4)
FAX TEL