Sharp UX-B20 - Manual (Page 28)

Setting the Date and Time
26
Setting the Date and Time
1
Press once and twice.
2
Press once and once.
3
Press once.
4
Enter a two-digit number for the month (“01” for January, “02” for
February, “12” for December, etc.).
Example: January
•
To correct a mistake, press to move the cursor back to the mistake and
then enter the correct number.
5
Enter a two-digit number for the day (“01” to “31”).
Example: the 5
th
Display:
The currently set date
appears (example):
ENTRY MODE
DATE&TIME SET
DATE 08-15-2004
DATE 01-15-2004
DATE 01-05-2004
Z A
RESOLUTION/
RECEPTION
INK
START/
MEMORY
The date and time appear in the display and
are printed at the top of every page you fax.
Set the date and time as shown below.